HMI Single End Lamps (other)

Product family benefits

Extremely uniform light distribution, reduced color or brightness shifts
Constant daylight color temperature throughout the entire lamp lifetime
High light output
Very good color rendering index of R_a> 90 throughout the whole lamp lifetime
Minimal light scattering
Optimized filling

Areas of application

Studio, TV, & Film
Stage & Theatre
Professional & High Speed Photography
Solar Simulation

Safety advice
Because of their high luminance, UV radiation and high internal pressure during operation, HMI lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Appropriate filters must ensure that UV radiation is reduced to an acceptable level. Mercury is released if the lamp breaks. Special safety precautions must be taken. Information on safety and handling is available on request or can be found in the leaflet included with the lamp or in the operating instructions.

Select products

Information about Family

The HMI single-end lamp family continues to offer the best in HMI quality. In addition to the DIGITAL line, these single end HMI lamps offer consistent 6000K color and >90 CRI. HMI Lamps ≥ 6000W are also designed with a unique round moly-foil that more evenly distributes heat and current, providing lamp life increases of 25% on average.

UVS (UV stop)

Drastically reduced UV emissions for protection of paint and extended fixture life

Tighter range of color temperature

For a stable CCT with reduced color and brightness shifts

Heat resistance

For high thermal requirements during the show

Products

Sort by:
Product	Nominal wattage	Nominal voltage	Nominal current	Nominal luminous flux	Nominal lifetime
HMI 2500 W/SE XS	2500 W	115 V	25.6 A	240000 lm	500 hr
HMI 4000 W/SE XS	4000 W	200 V	24 A	380000 lm	500 hr
HMI 12000 W/SE XS	12000 W	160 V	75 A	1150000 lm	500 hr